---

1.3 1.3 0x00 OFF UNLOCKED
Disconnected
Click mic to start

CH1

IRON
OFF
0 °C
Handle
SET 350 °C
0%
POWER
0%
STANDBY

CH2

IRON
OFF
0 °C
Handle
SET 300 °C
0%
POWER
0%
STANDBY

HOT AIR

AIR
OFF
0 °C
Handle
SET 380 °C
0%
AIR FLOW
Air Flow Setpoint 50 %
%
0%
POWER

Vacuum Pump

Vacuum Status Desoldering OFF
Notification

This is an alert message.

No Devices Found

No compatible serial devices detected.

Please ensure your soldering station is:

  • ✓ Powered ON
  • ✓ Connected via USB cable
  • ✓ Drivers installed (if required)

After connecting, click Retry to scan again.

iOS Not Supported

HEATEX Controller requires Web Serial API which is not available on iOS devices.

Alternative Options

Use Chrome on Desktop Windows, Mac, or Linux
Use Android Device Chrome or Edge browser

Features Requiring USB

  • Real-time temperature monitoring
  • Setpoint control
  • Channel power on/off
  • Vacuum pump control
  • Register browser access

You can still use the app in offline/demo mode to explore the interface.

Voice Commands

Control your soldering station hands-free

Power
Temperature
Vacuum
General
"CH1 ON"
Turn on Channel 1
"CH1 OFF"
Turn off Channel 1
"CH2 ON"
Turn on Channel 2
"HOT AIR ON"
Turn on Hot Air
"ALL OFF"
Turn off all channels
"SET CH1 TO 350"
Set CH1 to 350°C
"SET CH2 TO 300"
Set CH2 to 300°C
"SET HOT AIR TO 380"
Set Hot Air to 380°C
"CH1 TEMPERATURE"
Read CH1 temperature
"VACUUM ON"
Turn vacuum pump on
"VACUUM OFF"
Turn vacuum pump off
"HELP"
Show this help menu
"CONNECT"
Connect to device
"DISCONNECT"
Disconnect from device
"SET CH1 TO 350"
Set temperature
"INCREASE CH1"
Raise by 10°C
"DECREASE CH1"
Lower by 10°C
"SHOW GRAPH"
Navigate to graph
"STATUS"
Read system status
Tip: Speak clearly and wait for the confirmation tone